- Show A List Of Bluetooth Devices Using SwiftUI
A long time ago I wrote a post about discovering BLE peripherals and displaying them in list form. That was way before SwiftUI though so I thought I'd revisit the idea, remaking the feature in the quickest and low complexity way possible to get started quickly...
- Get List Of BLE Devices Using CoreBluetooth
This post will show the minimum effort needed to get a list of BLE (Bluetooth 4.0) devices that are advertising on your iOS device...
- Send/Recieve Hex Over Bluetooth SPP from Android
If you have used any of my earlier blog posts for sending data to a bluetooth module from an Android device you may have noticed you can only send ASCII characters. This is fine for most activities but what if you need to send carriage return or line feed, which are 0xD and 0xA respectively...
- RFduino & iOS - Sending large strings
With a limitation of 20 bytes per transaction, how can we send even just large strings to the RFduino...
- UART with Bluetooth Low Energy (BLE) using Dorji DBM01
Using some low cost BLE UART modules to do some simple communicating between a phone and device...
- Android Send/Receive data with Arduino using Bluetooth - Part 2
In part 2 I will explore making the Android app to send and receive data to an Arduino over Bluetooth...
- Anrdroid Send/Receive Data With Arduino Via Bluetooth - Part 1
In some previous posts I went through the basic steps to send data from an Android device to an Arduino using a bluetooth serial module. That was fun and all but it would be better if the Arduino could send data back to the Android device...
- Android to Arduino Data Send via Bluetooth Serial – Part 3
Finishing up the Android app and testing what we have built...
- Android to Arduino Data Send via Bluetooth Serial – Part 2
Making part of the Android app to connect with the Bluetooth module...
- Android to Arduino Data Send via Bluetooth Serial - Part 1
The intention is to connect an LCD display and Bluetooth module to an Arduino so that it can receive and display information using the LCD and inbuilt LED. I will then show you how to make a simple app to control these features...
